• Panelok Nut – Steel T-Nut 25.00mm

    From: $29.00

    The Panelok system is the ideal Nut and Bolt type fastener where a low profile finish is desirable on both-sides. When installed, a high tensile splined bolt with a moisture proof seal underhead and adhesive patch on the thread match neatly with the zinc plated T-nut. Vibration and tamperproof, the assembly is optimal for metal/wood applications. Low profile nut, ideal for truck doors.

    This is the nut component of a bolt & nut combo. Easy to install via a drill with a Torx T55 drive bit that helps make this combo tamper proof.

    Available in Pack Sizes of 25, 50, 75, 100

    View Data Sheet: Steel Panelok

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Panelok Nut – Steel T-Nut 15.87mm

    From: $27.00

    The Panelok system is the ideal Nut and Bolt type fastener where a low profile finish is desirable on both-sides. When installed, a high tensile splined bolt with a moisture proof seal underhead and adhesive patch on the thread match neatly with the zinc plated T-nut. Vibration and tamperproof, the assembly is optimal for metal/wood applications. Low profile nut, ideal for truck doors.

    This is the nut component of a bolt & nut combo. Easy to install via a drill with a Torx T55 drive bit that helps make this combo tamper proof.

    Available in Pack Sizes of 25, 50, 75, 100

    View Data Sheet: Steel Panelok

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Panelok Bolt – Steel 5/16″ Blue Seal 22.22mm

    From: $29.00

    The Panelok system is the ideal Nut and Bolt type fastener where a low profile finish is desirable on both-sides. When installed, a high tensile splined bolt with a moisture proof seal underhead and adhesive patch on the thread match neatly with the zinc plated T-nut. Vibration and tamperproof, the assembly is optimal for metal/wood applications.

    Available in Pack Sizes of 25, 50, 75, 100

    View Data Sheet: Steel Panelok

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Small Flange Stainless Steel Hex Body Closed End Rivnuts

    From: $118.00

    Rivnuts are a quick, reliable, low-cost way to insert high-quality load-bearing threads into weak or thin-gauge materials. Rivnuts provide load-bearing threads in sheet materials as thin as 0.50mm and has one-sided, blind insert capabilities.

    Available in different headforms, including large flange, low profile and various platings including steel, stainless steel, and aluminum alloy. Rivnuts can be installed in pre-coated or post-painted applications without damaging the surface.

    Hex Series- Features 

    The Hex Body Closed End Series is ideal when a low load bearing application requires a seal to prevent the ingress of liquids, solids or moisture. Key features include the Hexagon body that maximises the resistance to applied torque or reverse torque unbolting. The tapered entry allows for easy Hex Hole insertion.

    Available in Pack Sizes of 100

    View Data Sheet: Small Flange Stainless Steel Hex Body Closed End Rivnuts

    View our Full Rivnut Range Data Sheet Catalogue by clicking HERE

     

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Stainless Steel Mono Lock Rivets Countersunk Head

    From: $182.50

    Mono Lock Rivets are the ideal solution for applications with varying thickness requiring high shear and tensile strengths. The dual locking grooves on the mandrel provide excellent resistance to vibration as well as impressive shear strength and weather resistance. These Mono Lock Rivets offer excellent hole fill, wide grip range, pressure tight seal, and flush breaking mandrel regardless of material thickness.

    Features:

    • Stem mechanically locked into body.
    • Blind hole, one-sided installation capability.
    • Multi-grip capability.
    • High shear and tensile strength.
    • Good sheet take-up performance.
    • Excellent hole fill via rapidly expanded body.
    • One fastener can be used to replace several standard grip fasteners.
    • Reduced fastener inventory and simpler stock control.
    • Compensates for irregular, oversized, slotted, or misaligned holes.
    • Can stop sheet movement in non-standard holes.
    • Large gap closing capability.
    • Provides very strong, vibration-resistant joints.

    Available in Pack Sizes of 250, 500, 750, 1000

    View Data Sheet: Stainless Steel Mono Lock Rivets Countersunk Head

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Stainless Steel Hem-Fix High Strength Rivets Dome Head

    From: $190.00

    The Hemfix rivet has exceptional shear and tensile strength and a large blind side bearing area against the rear sheet. The large blind side bearing area spreads the load and prevents creep.

    The  Hemfix rivet can be used to fasten metal to metal, metal to plastic, and thin sheet to thick metal.

    Features:

    • Blind hole, one-sided installation capability.
    • Exceptional shear and tensile strength.
    • Large blind side bearing area against the rear sheet.
    • Spreads the tail bearing/clamp load on the rear sheet.
    • Ideal for thin sheet materials.
    • Provides strong, vibration resistant joints.

    Available in Pack Sizes of 250, 500, 750, 1000

    View Data Sheet: Stainless Steel Hem-Fix High Strength Rivets Dome Head

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Steel Hem-Fix High Strength Rivets Countersunk Head

    From: $103.00

    The Hemfix rivet has exceptional shear and tensile strength and a large blind side bearing area against the rear sheet. The large blind side bearing area spreads the load and prevents creep.

    The  Hemfix rivet can be used to fasten metal to metal, metal to plastic, and thin sheet to thick metal.

    Features:

    • Blind hole, one-sided installation capability.
    • Exceptional shear and tensile strength.
    • Large blind side bearing area against the rear sheet.
    • Spreads the tail bearing/clamp load on the rear sheet.
    • Ideal for thin sheet materials.
    • Provides strong, vibration resistant joints.

    Available in Pack Sizes of 250, 500, 750, 1000

    View Data Sheet: Steel Hem-Fix High Strength Rivets Countersunk Head

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Aluminium Orlock Rivets

    Orlock Rivets feature a unique double-locking  system ideal for applications that require high resistance to vibration, increased shear strength and a weather tight finish. Designed to form a bulb on the blindside, this distinctive feature increases load spread, prevents pull through and is widely used when securing Thick-to-Thin components or sheet type products.

    Available in a wide combination of diameters, grip ranges, materials and head styles, Orlock   rivets are a specialised fastener and may require a level of technical advice.

    View Data Sheet: Aluminium Orlock Rivets

  • Steel Orlock Rivets

    Orlock Rivets feature a unique double-locking  system ideal for applications that require high resistance to vibration, increased shear strength and a weather tight finish. Designed to form a bulb on the blindside, this distinctive feature increases load spread, prevents pull through and is widely used when securing Thick-to-Thin components or sheet type products.

    Available in a wide combination of diameters, grip ranges, materials and head styles, Orlock  rivets are a specialised fastener and may require a level of technical advice.

    View Data Sheet: Steel Orlock Rivets